Uncategorized Archives - Showplace Cabinetry

Here are the instructions to properly remove bracing from a new Showplace Walk-in Pantry cabinet with the push-in door.

It is important to follow the steps below in order, so the structural integrity of the cabinet remains intact prior to installation.

Remove Support Floor

1. Lay cabinet on its back.
2. Remove screws from bottom of false floor.
3. Remove and discard false floor.

close up view of a gray wooden pantry cabinet. The cabinet is angled upright.

Remove Back Bracing

4. Set cabinet right side up.
5. Remove all horizontal bracing,
in pantry opening, from back of
end panels – starting at the top.

Remove Second Brace

Remove Third Brace

Remove Fourth Brace

Remove Bottom Brace

Remove Inside Bracing

6. Remove foam and bracing from back of face frame, in panty opening – starting with top brace.

Install Corner Molding

7. Cabinet will come with 2 sticks of an angled corner molding.
8. Cut and pin (5/8”) molding where back of stile and end panel meet, to cover staples and holes from bracing.
9. Cut and install molding between brackets/hinges.

Cabinet must be installed level and plumb to maintain reveals and for pantry door to operate properly.

Specifications & Product Information Notice:
The specification, materials, and care information provided on this website are intended as a general reference only. Because Showplace cabinetry is custom-manufactured, final product characteristics will reflect the specific selections, modifications, accessories, and enhancements chosen by the homeowner in collaboration with their designer. As a result, the website content should not be interpreted as comprehensive or absolute for all projects.

Some Showplace-purchased products, including doors purchased from other manufacturers, vent hoods and blowers, internal hardware kits, etc., are manufactured by third-party suppliers. These components are subject to the supplier’s own specifications, limitations, and warranty terms. Care information can be requested through a Showplace dealer or cited on the original manufacturer’s website.

Showplace reserves the right to change or discontinue products, materials, or design specifications at any time without prior notice and without obligation to update or modify cabinetry produced previously.

Homeowners should not rely solely on website information when making purchase decisions. For precise, project-specific details including materials, construction methods, limitations, and care requirements, consult your authorized Showplace designer or dealer.

Showplace cabinetry is designed and crafted to stand up to rigorous daily use. No special or unique care is required for your paint or stained cabinets. Simple common-sense precautions and practices will keep your Showplace stained or painted cabinets looking great for years to come.

Things to keep in mind

Darkening: All woods naturally darken with age. There is no way to prevent this process as it is a part of wood’s natural character. Woods subjected to prolonged direct sunlight will darken faster.

Dimensional changes: Since wood is a naturally porous material, it will absorb and release moisture, causing unavoidable swelling and shrinking. Typically associated with switching seasons, this can cause dimensional changes, and in larger pieces, can result in minor warping. We recommend humidity levels in the home between 30% – 55%. Humidity levels outside that range can lead to cracked joints, shrinking center panels and broken mullions in doors with that modification.

Drawers and interiors: Drawer glides and hinges should need no periodic maintenance or lubrication.

Surface damage: Touch up those inevitable nicks and scratches with a Showplace touch-up kit. Kits are available from your Showplace dealer and include instructions.

Curing time: Showplace Cabinetry uses the highest quality Sherwin-Williams paints, SHER-WOOD® stains, sealers and topcoats providing high performance and a long lasting, enduring finish. All SHER-WOOD® finishes require a period of curing to take place, approximately 30 days, so the film can achieve its full performance properties.

Please be aware that the Showplace warranty does not apply to finishes that are exposed for prolonged periods of time to tobacco smoke and/or other smoke sources.

Horizontal surfaces: If your cabinetry uses finished wood for horizontal surfaces, remember these precautions:

Do not slide items across the surface. Rather, pick them up and set them down.

Make sure plants are in pots that will not seep water onto the wood, and take care that leaves do not touch the wood.

Use coasters under glasses, and hot pads under pots and pans.

Never set synthetic materials like rubber or plastic directly on the wood. The synthetic chemicals can damage the finish. Likewise, inks from printed materials can transfer into the finish.

Basic Care Tips

Wipe up spills, splatters and water spots as they occur. Keep cabinets dry.
Clean as needed with a soft, lint-free cloth. Use mild detergent or soap and warm water. Dry surfaces immediately with a soft cloth.
Avoid using a dishcloth or sponge, which could contain remnants of grease or detergents. Do not use products with bleach, ammonia or abrasive additives.
Never use scouring pads, steel wool or powdered cleaners.
Do not allow oven cleaners to come in contact with wood finishes.
Avoid placing small kitchen appliances where heat is directed onto cabinet surfaces.
Avoid draping damp clothes or dish towels over cabinet doors. Excessive moisture can cause permanent damage.
Have fingerprints? Try Murphy’s Oil soap (use as directed).

Find Your Local Dealer

2024 Design Contest

Find Your Finish

Brochures

Category: Uncategorized

Removing Bracing From Your Walk-in Pantry With Push-in Door